Trimco price book — product lookup and current pricing

Trimco makes the trim a door is handled by: push and pull plates, kick and armor plates, floor and base stops and holders, flush and hospital pulls, edge guards, surface bolts, coordinators, door knockers and viewers. Twenty-seven sections of the Trimco list price book are priced here, and most of the line prices from a model code and a finish — which is why a schedule line usually resolves in one pass.

Paste a Trimco part number, or a line lifted straight from a hardware schedule. The resolver decodes the model, size and finish, assembles the orderable part number and prices it from the current Trimco list price book. Built for architectural hardware consultants, estimators and detailers working from real schedules.

Messy take-off wording is fine.

Reach the whole book, not just the guides

Trimco prices 84 stops and holders in one section alone. The guides below cover four models; the lookup prices any of the rest — flush pulls, edge guards, coordinators, surface bolts — without a page of its own.

Separate the model from the finish

Most of the Trimco line prices from a code plus a finish, and the book joins the two with its own separator. The resolver reads the code as the model and the trailing number as the finish, so a line written either way lands on the same part number.

Worked Trimco lines

Resolved by the same engine the guides use, refreshed when this page regenerates — not transcribed.

  • Trimco 1270CV

    A stop with no finish named — the resolver asks rather than guessing.

    Choose finish:

    603 · 605 · 606 · 613 · 613E · 619 and 8 more

    Trimco STOPS-HOLDERS book, effective May 29, 2026 · pp. 56–76

  • Trimco 3090 605

    A coordinator, from a section with no guide page.

    3090 605

    $111.30 · COORDINATORS

    Trimco COORDINATORS book, effective May 29, 2026 · p. 70

  • Trimco 1554 626

    A roller latch, priced from the model and the finish alone.

    1554 626

    $91.20 · ROLLER-LATCHES-CATCHES

    Trimco ROLLER-LATCHES-CATCHES book, effective May 29, 2026 · pp. 47–64

Browse Trimco product guides

Protection plates

Push & pull plates

Stops & holders

Source price book

Trimco’s own published book, opened at the page these figures were read off. Conversant links it and hosts nothing.

Common Trimco questions

How do I find the price of a Trimco product?
Paste the model into the lookup above, or open the guide for that model below. The price is resolved from the current Trimco list price book, and the page shows that book’s effective date and the page range the figures were read from.
Can I look up a Trimco product that has no guide page here?
Yes. The four guides below are a starting point, not the boundary — flush pulls, hospital pulls, edge guards, surface bolts, coordinators, door knockers, viewers and the rest of the book all resolve and price through the lookup.
How are Trimco kick plates priced?
By plate size. Size is an open value rather than a fixed list, because the book prices the plate by its area — so an 18x48 plate prices well above an 8x34 in the same model and finish. Give the size as height by width and the resolver prices that plate.
What do the finish numbers on a Trimco line mean?
They are BHMA finish codes, and how much the book says about them varies by section. The push plate, pull plate and stop sections name every code — 605 polished brass, 606 satin brass, 613 dark oxidized satin bronze, 622 matte black, 629 polished stainless steel — and even there the wording is not identical: 626 is satin chrome on the push plates and brushed chrome on the pull plates and stops, 630 satin stainless steel in one and brushed stainless steel in another. The kick plate section names none of them, listing codes alone. So each guide shows what its own section carries, and where a section gives no name the reading is the standard BHMA one rather than Trimco's wording. Most sections also carry a SPECIAL code for finishes quoted outside the standard list.
What happens if a Trimco line is missing its finish?
It asks instead of guessing. A bare 1270CV comes back with the finishes that section actually carries and a price range across them, rather than picking one and quoting a single figure.
Where does the Trimco pricing come from?
From the Trimco list price book, effective 2026-05-29. Every price carries the book it came from, that book’s effective date and the pages the figures were read off, and the source section on each guide links Trimco’s own hosted copy.
Does Conversant sell Trimco products?
No. These guides publish lookup, configuration and manufacturer list pricing only. Order through a Trimco distributor.

Pricing is resolved from the Trimco manufacturer price book covering the resolved series, for the configuration given. Conversant does not sell Trimco product; these guides publish lookup, configuration and manufacturer list pricing only.

More brands: LCN, Adams Rite, Schlage, NGP, Ives, Von Duprin, Hager.