How much does a Hager 401S threshold cost?

This page prices the 401S live from the current Hager price book. Thresholds price by the inch, so unlike a hinge or a lock there is no single catalog number to quote — the card above is seeded at a 36" mill-finish 401S, and typing a different length or finish reprices it.

How is the gasket specified on a Hager threshold?

As its own token on the line, not by swapping a letter on the model. The book carries a gasket axis with six values — S (silicone insert), W (pile insert), N (neoprene), B (brush insert), V (vinyl insert) and F (vinyl fin) — and a line that uses it reads like 750S N 36" 32D, with the gasket sitting between the model and the length. The S in 401S is part of the model code itself: 401 and 401W are not models the book prices, while 401S is.

What finishes are available on Hager thresholds?

Thirteen, and they mix aluminum finishes with gasket colours because the book prices both on the same axis: MIL (mill finished aluminum), CLR (clear anodized aluminum), DBA (dark bronze anodized aluminum), BLA (black anodized aluminum), CAL (abrasive cast aluminum), 32D (matte stainless steel), plus BLK (black vinyl), BROWN and CHARCOAL for the gasket, and 000 for gasket only.

Can Hager thresholds be notched or machined to size?

Yes, and the machining is priced rather than assumed. The book carries fifteen options, including L_NOTCH_BOTH_ENDS and U_NOTCH_BOTH_ENDS with their own setup charges for runs under 100 (L_NOTCH_SETUP_UNDER_100, U_NOTCH_SETUP_UNDER_100), BEVEL_ONE_EDGE (beveled one edge), RIP_ONE_EDGE (rip width), PAN_FOR_WATER_RETURN (water return pan) and lead lining. Options are multi-select, so a line can carry a notch and a rip together.

Can I get end caps on a Hager threshold?

They are priced options on the same list: END_CAPS_ADB_DBA (dark bronze end caps) and END_CAPS_ADB_GLD (gold end caps). Like the notching, they are added to the line and appear in the assembled part number rather than being folded into the base price.

How many threshold models does Hager price?

The threshold book prices 134 models, of which the 401S is one — the 400 range alone runs 401S, 402S, 403S, 404S, 406S, 407S, 410S, 412S, 413S and 415S. Any of them can be priced by typing the code with a length; this page seeds the 401S.

Hager 401S threshold price and specs Beta

Hager's 401S threshold, priced from the current Hager book. Thresholds price by length, so the card below is seeded at 36 inches in mill finish — change either and the price follows.

Try:

Covers commercial door hardware, brand by brand ·

PricedHager 401S 36" MIL

How this part number assembles

Model

Length

FinishMill finished aluminum

optionalpick or leave off

Order as

401S 36 MIL

Brand

Hager

Series

THRESHOLDS

$31.59

$Priced from the Hager price book · effective Mar 1, 2026 · pp. 518–537

How this price is built

Printed rate $10.53/ft × 3 ft$31.59

List price each$31.59

Every line is a printed value from the manufacturer's book — we add, never estimate.

Specifications

This configuration

FinishesModel (401S)Finishes: MIL, DBA, GLD

From the catalog

Model printed	Finishes printed
401S	Finishes: MIL, DBA, GLD

Model printed	Finishes printed
572S	Finishes: MIL, DBA, GLD

Model printed	Finishes printed
408S	Finishes: MIL, DBA, GLD
419S	Finishes: MIL, DBA, GLD

Model printed	Finishes printed
503S	Finishes: MIL, DBA, GLD
506S	Finishes: MIL, DBA, GLD

Model printed	Finishes printed	Insert printed
435S	Finishes: MIL, DBA, GLD	Insert: V, N, S, W

Model printed	Finishes printed
440S	Finishes: MIL, DBA, GLD
450S	Finishes: MIL, DBA, GLD
455S	Finishes: MIL, DBA, GLD
484S	Finishes: MIL, DBA, GLD

Model printed	Finishes printed	Inserts printed	Door undercut printed
599S	Finishes: MIL, DBA, GLD	Inserts: V, N, S, W	Door Undercut: Allow 5/8”

Model printed	Finishes printed	Inserts printed
518S	Finishes: MIL, DBA, GLD	Inserts: V, N, S, W

Model printed	Finishes printed	Fasteners printed	Notes printed
600S	Finishes: MIL, DBA, GLD
604S	Finishes: MIL, DBA
701S	Finishes: MIL	Fasteners: #6 x 7/8” nail	Notes: J-Hook interlocks with threshold to seal against wind and rain

Heading printed	Statement printed
Vinyl Thresholds	Transition between different floor types.

Model printed	Finishes printed
717S	Finishes: MIL, DBA

Model printed	Finishes printed	Insert printed	Description printed
908S	Finishes: MIL, DBA, GLD, CLR	Insert: V	*Unnotched & Notched profiles available

Model printed	Heading printed	Finishes printed	Inserts printed	Category printed	Notes printed
730S	730S - Mortise	Finishes: MIL	Inserts: N, S	Category: H, J	Notes: Available order lengths: 12" to 60". Lengths 16"-29" may be trimmed for fitting (2" maximum). Lengths 30"-60" may be trimmed for fitting (5" maximum).

Model printed	Finishes printed	Inserts printed	Category printed
770S	Finishes: MIL, DBA, GLD	Inserts: B, V	Category: H, J

Model printed	Finishes printed	Inserts printed	Category printed
802S	Finishes: MIL, DBA, GLD	Inserts: B	Category: H, J

Model printed	Finishes printed	Category printed	Notes printed
859S	Finishes: MIL, DBA	Category: H, J	Notes: Magnetic

Model printed	Finishes printed	Inserts printed	Category printed
877S	Finishes: MIL, DBA, GLD	Inserts: N	Category: H, J

Model printed	Finishes printed	Inserts printed	Category printed
882S	Finishes: DBA, GLD, CLR	Inserts: B	Category: H, J

Model printed	Finishes printed	Inserts printed	Category printed	Notes printed
772S	Finishes: MIL, DBA	Inserts: V, N	Category: H, J
756S	Finishes: MIL, DBA, GLD	Inserts: V	Category: H, J	Notes: Order two (2) for a set

Model printed	Finishes printed	Inserts printed	Category printed	Notes printed
776S	Finishes: DBA, GLD, CLR	Inserts: N	Category: H, J
802S	Finishes: MIL, DBA, GLD	Inserts: B	Category: H, J	Notes: Order two (2) for a set

Model printed	Heading printed	Finishes printed	Inserts printed	Category printed	Notes printed	Notes 2 printed	Notes 3 printed	Notes 4 printed
847S	847S \| 848S	Finishes: MIL, DBA, GLD	Inserts: W	Category: J	Notes: • Adjustable	Spring loaded	Mortise depth = 21/32”
848S	847S \| 848S	Finishes: MIL, DBA, GLD	Inserts: W	Category: J	Notes: • Adjustable	Spring loaded	Mortise depth = 21/32”
849S		Finishes: MIL, DBA			Notes: • Magnetic	96” maximum door height	Designed for use on 80” to 96” doors only	Sets shorter than 80” may not work properly
872S		Finishes: DBA, GLD, CLR	Inserts: N	Category: H, J	Notes: • Order two (2) for a set

Model printed	Finishes printed	Inserts printed	Category printed	Notes printed
874S	Finishes: MIL, DBA, GLD, US32D	Inserts: N	Category: H, J
882S	Finishes: DBA, GLD, CLR	Inserts: B	Category: H, J	Notes: Order two (2) for a set

Heading printed	Subheading printed	Statement printed
PRODUCT PRESENTATION		Dimensions on stainless steel extrusions may differ slightly than those detailed. Questions regarding any dimensions should be directed to Hager Companies Customer Service.
PRODUCT PRESENTATION		Drawings or illustrations used in the catalog are subject to change without notice. Questions on any dimensions should be obtained by contacting Hager Companies Customer Service.
FABRICATION OPTIONS		Bevel one edge of threshold
FABRICATION OPTIONS		Rip one edge width of threshold
FABRICATION OPTIONS		L-notch both ends of threshold
FABRICATION OPTIONS		U-notch both ends of threshold
FABRICATION OPTIONS		Tack weld one line of threshold
FABRICATION OPTIONS		Pan for water return of threshold
FABRICATION OPTIONS		Sure Step Non-Slip Abrasive Coating – A rugged, durable coating that can be applied to all Hager Companies’ metal thresholds. Ideal for thresholds being used in wet, oily or corrosive environments.
MATERIALS & FINISHES	Metals	All aluminum extrusions are of alloy 6063-T5.
MATERIALS & FINISHES	Metals	For stock finishes, refer to the code listed below each individual item throughout the catalog. Please inquire for the availability on nonstock finishes.
MATERIALS & FINISHES	Metals	MIL - mill finish aluminum
MATERIALS & FINISHES	Metals	CAL - cast aluminum
MATERIALS & FINISHES	Metals	GYP - primed steel grey
MATERIALS & FINISHES	Metals	DBA - dark bronze anodized aluminum
MATERIALS & FINISHES	Metals	SCA - Hager Sure Step on aluminum
MATERIALS & FINISHES	Metals	32D - stainless steel (non-extruded)
MATERIALS & FINISHES	Metals	GLD - gold anodized aluminum
MATERIALS & FINISHES	Metals	CLR - clear anodized aluminum
MATERIALS & FINISHES	Metals	LBA - light bronze anodized aluminum
MATERIALS & FINISHES	Metals	WHP - white paint on aluminum
MATERIALS & FINISHES	Metals	USP - prime coat
MATERIALS & FINISHES	Gaskets	Gasketing is available in a wide variety of materials. Vinyl is an economical choice and remains flexible down to -40°F (-40°C). EPDM gasketing is supplied both as a solid (dense) and as a closed cell sponge with a tough outer skin. It remains flexible down to -50°F (-49°C). Silicone gasketing provides the best resistance to cold by remaining flexible down to -70°F (-57°C). Refer to the price book for a list of available replacement gaskets. Gasketing codes are listed below.
MATERIALS & FINISHES	Gaskets	B - nylon brush
MATERIALS & FINISHES	Gaskets	N - neoprene
MATERIALS & FINISHES	Gaskets	S - silicone
MATERIALS & FINISHES	Gaskets	V - vinyl
MATERIALS & FINISHES	Gaskets	W - pile (thread may be removed to allow expansion)
ORDERING INFORMATION		When ordering, please specify by product number, length, quantity, finish and fasteners required. Thresholds & weatherstripping are fabricated in standard sizes with 1/2” (12.7 mm) extra on thresholds 48” (1219.2 mm) and under. Anodized thresholds are fabricated in standard sizes with 1/4" (6.35 mm) extra on thresholds 48" (1219.2 mm) and under. Thresholds over 48” (1219.2 mm) are supplied with 1” (25 mm) extra length for fitting. Anodized thresholds over 48" (1219.2 mm) are fabricated in standard sizes with 3/4" (19.05 mm) extra length for fitting. Exact lengths are available upon request (specify CTEL).
ORDERING INFORMATION		Example: 891S V 36 x 84 MIL

Heading printed	Subheading printed	Group printed	Statement printed
FASTENERS	Standard		All products are furnished with appropriate fasteners as listed, except where noted. Most thresholds are furnished with mounting holes and #10 x 1-1/2” flat head sheet metal screws. Most weatherstripping products are furnished with slotted holes and #6 x 5/8” pan head sheet metal screws.
FASTENERS	Optional	Thresholds	#10 wood screws and plastic anchors
FASTENERS	Optional	Thresholds	#10 wood screws and lead anchors
FASTENERS	Optional	Thresholds	#10 machine screws and lead anchors
FASTENERS	Optional	Thresholds	#10 stainless steel wood screws
FASTENERS	Optional	Thresholds	#10 stainless steel wood screws and plastic anchors
FASTENERS	Optional	Thresholds	#10 stainless steel wood and lead anchors
FASTENERS	Optional	Thresholds	1/4-20 stainless steel machine screws and lead anchors
FASTENERS	Optional	Thresholds	1/4-20 machine screws and lead anchors
FASTENERS	Optional	Thresholds	1/4-20 x 2” flat head sleeve anchor
FASTENERS	Optional	Thresholds	#10 torx sheet metal screws
FASTENERS	Optional	Thresholds	#10-24 x 1-1/2” stainless steel torx machine screw with lead anchor
FASTENERS	Optional	Thresholds	#10-stainless steel spanner head wood screw with lead anchor
FASTENERS	Optional	Thresholds	Cast-on anchors (cast products only)
FASTENERS	Optional	Thresholds	Tap-con type (1/4” x 1-3/4”)
FASTENERS	Optional	Weatherstripping	#6 x 5/8” pan-head stainless steel screws
FASTENERS	Optional	Weatherstripping	#6 x 5/8” self-drilling (TEK) screws (Steel-zinc plated)
FASTENERS	Optional	Weatherstripping	#6 x 5/8” pan-head torx sheet metal screws
FASTENERS	Optional	Weatherstripping	#6 x 5/8” stainless steel self-drilling (TEK) screws
FASTENERS	Optional	Weatherstripping	1/4 - 20 x 1-1/4” sex bolts
FASTENERS	Optional	Weatherstripping	Two-way self-adhesive tape
GENERAL INSTALLATION INSTRUCTIONS FOR PRESS-ON PRODUCTS:			Product returnable within first 6 months after purchase date
GENERAL INSTALLATION INSTRUCTIONS FOR PRESS-ON PRODUCTS:			Installation should take place after construction has been completed, and final cleaning has taken place
GENERAL INSTALLATION INSTRUCTIONS FOR PRESS-ON PRODUCTS:			The frame should be cleaned; isopropyl alcohol is recommended
GENERAL INSTALLATION INSTRUCTIONS FOR PRESS-ON PRODUCTS:			Not recommended for unsealed or porous applications
GENERAL INSTALLATION INSTRUCTIONS FOR PRESS-ON PRODUCTS:			Do not store these products in extreme heat/cold or for prolonged periods of time
CERTIFICATIONS	Handicap Accessibility		Products denoted by this symbol are designed for applications where handicap accessibility is specified. These products are no greater than 1/2” (12.7 mm) in height and have no more than 1/4” (6.3 mm) vertical rise or with slope proportions no greater than 1:2 slope. Offset floor conditions greater than 1/2” (12.7 mm) require a 1:12 slope.
CERTIFICATIONS	Air Infiltration		Products denoted by this symbol have been tested with air/smoke infiltration, all within the (0.500 cfm/ sq. ft. for double doors and .300 cfm for single doors) maximum allowable leakage at a pressure of a 25 mph wind (1.56 psf). The tests were conducted in accordance with ASTM test procedures and meet ASTM: E283.
CERTIFICATIONS	Sound Tested		Products denoted by this symbol have been sound tested and received the appropriate STC rating. The tests were conducted in accordance with ASTM test procedures and meet ASTM: E90 & ASTM: E413.
BHMA Certified			BHMA Certification Program was developed as a means for manufacturers of builders hardware to indicate compliance with American National Standards sponsored by BHMA. Participating manufacturers certify compliance with the standards based on a continuing program of passing the prescribed tests.

Heading printed	Subheading printed	Statement printed
	Underwriter’s Laboratories	Products denoted by this symbol are classified and labeled by Underwriter’s Laboratories, Inc. as gasket material for use on listed steel frames and/ or classified swinging type fire doors of the hollow metal or steel covered composite type rated up to 3 hours, or wood core fire doors rated up to 1-1/2 hours. Test results show these products do not adversely affect the fire resistance of the door or frame according to its UL rating. All products are regularly checked under a labeling and listing service.
	Underwriter’s Laboratories	UL 10C (Positive Pressure) complies with IBC, NFPA 80 and NFPA 252 for hollow metal fire doors rated up to 3 hours and wood fire doors rated up to 90 minutes.
	Underwriter’s Laboratories	UL 10B complies with NFPA 80 and NFPA 252 for hollow metal fire doors rated up to 3 hours and wood fire doors rated up to 90 minutes.
	Underwriter’s Laboratories	Notes: Ratings on some items may vary and are noted on the individual products. For a more complete look at classifications on individual products, please visit www.ul.com/database and reference R13647.
THE INTERNATIONAL BUILDING CODE (IBC)		The International Building Code (IBC) requires swinging fire doors to be tested in accordance with ANSI/UL 10C or NFPA 252, with the neutral pressure level established at 40 inches or less above the sill. This causes “positive pressure” forces against the door assembly above 40 inches.
THE INTERNATIONAL BUILDING CODE (IBC)		The result is hot gases and smoke leak out between the door and frame above this level, posing a serious threat to life-safety; and on wood doors rapidly deteriorating the integrity of the door edges, requiring either a built-in or supplemental “edge sealing system” to pass the test.
THE INTERNATIONAL BUILDING CODE (IBC)		Fire door assemblies in corridors and smoke barrier walls are required to be smoke and draft control assemblies tested in accordance with UL1784 allowing a maximum air leakage of 3 cubic feet per minute per square foot of door opening at ambient temperature (75°F) and elevated temperature (400°F). These assemblies require the letter “S” on the fire rating label of the door indicating compliance “when listed or labeled gasketing is also installed.”
THE INTERNATIONAL BUILDING CODE (IBC)		Fire doors are classified based upon their construction and edge sealing sysem requirements. Fire-rated gasketing is classified as follows:
THE INTERNATIONAL BUILDING CODE (IBC)		Category G - Edge-sealing system
THE INTERNATIONAL BUILDING CODE (IBC)		Category H - Smoke and draft control gasketing
THE INTERNATIONAL BUILDING CODE (IBC)		Category J - Gaskets other than category G or H
THE INTERNATIONAL BUILDING CODE (IBC)	Fire Test - Category G	Gaskets that are edge-sealing systems. Category “G” - edge-sealing systems are for use with fire doors requiring an edge seal to meet positive pressure code requirements. These systems are surface-applied to either the perimeter of the door frame or meeting edges of door pairs. Category “G” gaskets are usually intumescent material; this material will swell many times its original size during a fire and help contain the spread of fire by sealing the edges of the door.
THE INTERNATIONAL BUILDING CODE (IBC)	Fire Test - Category J	Products that are positive pressure tested to determine that they do not contribute to flaming during a fire; they do not provide an edge-sealing system. Examples are gaskets used for sound, draft control or automatic door bottoms.
THE INTERNATIONAL BUILDING CODE (IBC)	Smoke and Draft Control Test - Category H	This is a separate second test that does not involve fire. All gaskets being tested for smoke must initially be fire tested under the requirements of UL 10C and receive a category “G” or “J” rating before being smoke tested.
THE INTERNATIONAL BUILDING CODE (IBC)		Below are some key phrases that indicate positive pressure requirements:
THE INTERNATIONAL BUILDING CODE (IBC)		IBC 2003 (and later) - International Building Code
THE INTERNATIONAL BUILDING CODE (IBC)		UL 10-C - Positive Pressure Fire Test
THE INTERNATIONAL BUILDING CODE (IBC)		ASTME-2074-00 - Fire Test of Door Assemblies
THE INTERNATIONAL BUILDING CODE (IBC)		Shall meet positive pressure requirements
THE INTERNATIONAL BUILDING CODE (IBC)		Intumescent seals - imply positive pressure
THE INTERNATIONAL BUILDING CODE (IBC)		The www.iccsafe.org web site of the International Code Council (ICC) has a map of code adoption by state. This site is frequently updated and by clicking on a state, you can see what codes they have adopted.

2016_hager_catalog_tandw_rev5_v145 · 2016

That's one line. Conversant prices whole schedules — hundreds of lines, minutes.