How much does a Von Duprin 98 or 99 exit device cost?

The price on this page is assembled live from the current Von Duprin price book, so it moves when Von Duprin reprices. A bare 98 or 99 prices as a range, because the function and the finish drive the number — the resolver asks for both before it will quote a single figure. A 98 and a 99 in the same configuration come back at the same list price, so the card above prices either code.

What is the difference between the Von Duprin 98 and the 99?

The catalog gives both codes one page, headed "98/99 Rim exit device", and prints the difference as the case: "The 98 device has a smooth mechanism case and the 99 device has a grooved case." The price book carries the same distinction in the series names it prints — 98 is the Smooth Series, 99 the Grooved Series. The one other place the page separates them is the finishes row, which reads "605, 606, 612, 625, 626/626AM, 628, 710, 711 and 643e (619 and 630 available with 98 Series only)". Everything else on that page — dimensions, latch bolt, options, dogging — is printed for the pair.

What do I need to specify to order a 98 or 99 rim exit device?

Two selections firm the price: the device function or outside trim, and the finish. The trim list runs from EO (exit only) and NL (night latch) through knob, lever, turn lever and thumbpiece trims, and the specifications block notes the device "ships EO/DT/NL; Field selectable; For TP, K or L remove NL drive screw from device". Device length goes by door size — the page prints a 3' device for a 2'4" to 3' door and a 4' device for a 2'10" to 4' door.

Is the Von Duprin 98/99 handed?

The catalog prints the rim device as "non-handed except when the following device options are used: SD (special dogging), -2 (double cylinder) or SS (signal switch)". A plain 98 or 99 therefore needs no handing, and those three options are the exceptions the page itself names. The fire devices print their own list on their own page: -2, -2SI (double cylinder with security indicator) or SS.

What dogging comes on a Von Duprin 98/99?

Hex key dogging is standard — the accessories block prints it as coming standard on 98/99 rim exit devices. The dogging options table then prints CD (cylinder dogging), CD-CX (Chexit cylinder dogging), CDSI (cylinder dogging with security indicator), HDSI (hex dogging with security indicator), SD (special center case dogging), LD (less dogging), DI (dogging indicator) and CI (cylinder dogging indicator). The fire devices are the exception, and their page says so in one line: "No mechanical dogging; QEL options available."

What electrified options can I order on a 98 or 99?

The page prints ten: LX (latch bolt monitor switch), RX (request to exit), RX2 (double request to exit), ESL (emergency secure lockdown), QEL (quiet electric latch retraction), SS (signal switch), CX (Chexit delayed exit), ALK (alarm exit kit), WP-RX (waterproof request to exit, which the row notes is available to order with Outdoor Defense) and CON (Allegion Connect). They ride the part number as prefixes and suffixes on the device code, which is how the tool above assembles them.

Is the Von Duprin 98/99 UL listed, and what about fire doors?

The 98/99 page prints the devices as "UL listed for panic exit hardware" and "certified to ANSI/BHMA A156.3 Grade 1". Fire is a separate printed page and a separate part number: the 98-F and 99-F are "certified to ANSI/BHMA A156.3 Grade 1 and UL listed for fire exit hardware", and the catalog points at its own page 69 for the UL fire exit hardware label and door opening size information. A 98-F line resolves here as its own part number on the same price book — and note that the fire page prints no mechanical dogging.

Von Duprin 98/99 rim exit device price and specs Beta

Von Duprin's 98 and 99 rim exit devices share one catalog page and one price book — the 98 with a smooth mechanism case, the 99 grooved. Pick the function and the finish and the part number assembles below, decoded segment by segment.

Try:

Covers commercial door hardware, brand by brand ·

PricedVon Duprin 98 EO 626

How this part number assembles

Device SeriesSmooth Series

FinishSatin Chrome

TrimPanic As Exit Only

optionalpick or leave off

Order as

98 .626 .EO

Brand

Von Duprin

Series

$2,284.00

$Priced from the Von Duprin price book · effective Feb 27, 2026 · pp. 25–27

How this price is built

Printed grid cell — 626 finish column$2,284.00

List price each$2,284.00

Every line is a printed value from the manufacturer's book — we add, never estimate.

Specifications

Series

Center case8" x 2 3⁄4" x 2 3⁄8" (203mm x 70mm x 60mm)

Mechanism case2 1⁄4" x 2 1⁄4" (57mm x 57mm)

ProjectionPushbar neutral – 3 13⁄16" (97mm) Pushbar depressed – 3 1⁄16" (78mm)

From the catalog

98/99 Rim exit device

Statement printed
98 and 99 rim exit devices for all types of single and double doors with mullion, UL listed for panic exit hardware. Devices are certified to ANSI/BHMA A156.3 Grade 1. The 98 device has a smooth mechanism case and the 99 device has a grooved case. The rim device is non-handed except when the following device options are used: SD (special dogging), -2 (double cylinder) or SS (signal switch). Covers stock hollow metal doors with 86 or 161 -2SI (double cylinder with security indicator) cutouts on single doors (may cover cutouts on pairs – consult template).

Statement printed

98 and 99 rim exit devices for all types of single and double doors with mullion, UL listed for panic exit hardware. Devices are certified to ANSI/BHMA A156.3 Grade 1. The 98 device has a smooth mechanism case and the 99 device has a grooved case. The rim device is non-handed except when the following device options are used: SD (special dogging), -2 (double cylinder) or SS (signal switch). Covers stock hollow metal doors with 86 or 161 -2SI (double cylinder with security indicator) cutouts on single doors (may cover cutouts on pairs – consult template).

Specifications

Spec	Value
Device functions	Device ships EO/DT/NL; Field selectable; For TP, K or L remove NL drive screw from device
Device centerline from finished floor	39 13⁄16" (1011mm) 39 11⁄16" (1008mm) with mullion
Center case	8" x 2 3⁄4" x 2 3⁄8" (203mm x 70mm x 60mm)
Mechanism case	2 1⁄4" x 2 1⁄4" (57mm x 57mm)
Projection	Pushbar neutral – 3 13⁄16" (97mm) Pushbar depressed – 3 1⁄16" (78mm)
Latch bolt	Deadlocking, 3⁄4" (19mm) throw
Finishes	605, 606, 612, 625, 626/626AM, 628, 710, 711 and 643e (619 and 630 available with 98 Series only)
Fasteners and sex bolts (SNB)	Includes screw pack for 1 3⁄4" (44mm) and 2 1⁄4" (57mm) thick metal or wood doors (Optional 425 SNB available, see page 66 for quantities)

Device lengths

Nominal printed	Door size printed
3'	2'4" to 3' (711mm to 914mm) Door size
4'	2'10" to 4' (864mm to 1219mm) Door size

Electrified options

Code printed	Option printed
LX	Latch bolt monitor switch
RX	Request to exit
RX2	Double request to exit
ESL	Emergency secure lockdown
QEL	Quiet electric latch retraction
SS	Signal switch
CX	Chexit delayed exit
ALK	Alarm exit kit
WP-RX	Waterproof request to exit (option available to order with Outdoor Defense)
CON	Allegion Connect

Mechanical options

Code printed	Option printed
-2	Double cylinder
-2SI	Double cylinder with security indicator
AX	Accessible device
FER	Fortified exit rim
GBK	Glass bead kit
OUT	Outdoor defense
PN	Pneumatic latch retraction
QM	Quiet mechanical
SNB	Sex bolts
SEC	Security screws
WH	Weep holes (option available to order with Outdoor Defense)

Dogging feature

Statement printed
Hex key dogging standard

Dogging options

Code printed	Option printed
CD	Cylinder dogging
CD-CX	Chexit cylinder dogging
CDSI	Cylinder dogging with security indicator
HDSI	Hex dogging with security indicator
SD	Special center case dogging
LD	Less dogging
DI	Dogging indicator
CI	Cylinder dogging indicator

98-F/99-F Rim exit device

Statement printed
98-F and 99-F Rim fire exit devices are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for fire exit hardware. See page 69 for detailed information on UL fire exit hardware label and door opening size information. The 98-F device has a smooth mechanism case and the 99-F device has a grooved case. The rim device is non-handed except when the following device options are used: -2 (double cylinder), -2SI (Double cylinder with security indicator) or SS (signal switch).

Statement printed

98-F and 99-F Rim fire exit devices are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for fire exit hardware. See page 69 for detailed information on UL fire exit hardware label and door opening size information. The 98-F device has a smooth mechanism case and the 99-F device has a grooved case. The rim device is non-handed except when the following device options are used: -2 (double cylinder), -2SI (Double cylinder with security indicator) or SS (signal switch).

Specifications

Spec	Value
Device functions	Device ships EO/DT/NL; Field selectable; For TP, K or L remove NL drive screw from device
Device centerline from finished floor	39 13⁄16" (1011mm) 39 11⁄16" (1008mm) with mullion
Center case	8" x 2 3⁄4" x 2 3⁄8" (203mm x 70mm x 60mm)
Mechanism case	2 1⁄4" x 2 1⁄4" (57mm x 57mm)
Projection	Pushbar neutral – 3 13⁄16" (97mm) Pushbar depressed – 3 1⁄16" (78mm)
Latch bolt	Deadlocking, 3⁄4" (19mm) throw
Finishes	605, 606, 612, 626/626AM, 628, 710, 711 and 643e (619 and 630 available with 98 Series only)
Fasteners and sex bolts (SNB)	Includes screw pack for 1 3⁄4" (44mm) and 2 1⁄4" (57mm) thick metal or wood doors; Optional 425 SNB available for metal doors; 425 and 825 SNB required on wood doors without SLM blocking (See page 66 for quantities)

Device lengths

Nominal printed	Door size printed
3'	2'4" to 3' (711mm to 914mm) Door size
4'	2'10" to 4' (864mm to 1219mm) Door size

Electrified options

Code printed	Option printed
LX	Latch bolt monitor switch
RX	Request to exit
RX2	Double request to exit
ESL	Emergency secure lockdown
QEL	Quiet electric latch retraction
SS	Signal switch
CX	Chexit delayed exit
ALK	Alarm exit kit
WP-RX	Waterproof request to exit (option available to order with Outdoor Defense)
CON	Allegion Connect

Mechanical options

Code printed	Option printed
-2	Double cylinder
-2SI	Double cylinder with security indicator
AX	Accessible device
GBK	Glass bead kit
OUT	Outdoor defense
PN	Pneumatic latch retraction
QM	Quiet mechanical
SNB	Sex bolts
SEC	Security screws
SLM	Special laminate material blocking
WH	Weep holes (option available to order with Outdoor Defense)

Dogging option

Statement printed
No mechanical dogging; QEL options available

XP98/99 Rim exit device

Statement printed
XP98/99 Rim exit devices are designed for single and double doors with mullion that require increased security. The “smart” latch changes shape when subjected to external forces. This design enables the exit door to withstand an external attack and remain secure. Additionally, the patented latch bolt design provides greater, longer-lasting latch bolt to strike contact which is not easily affected by the twisting motion of a weakened frame, resulting in an opening that will remain strong. Devices are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for panic exit hardware. The rim device is non-handed except when the following device options are used: SD (special dogging) or -2 (double cylinder). Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs – consult template).

Statement printed

XP98/99 Rim exit devices are designed for single and double doors with mullion that require increased security. The “smart” latch changes shape when subjected to external forces. This design enables the exit door to withstand an external attack and remain secure. Additionally, the patented latch bolt design provides greater, longer-lasting latch bolt to strike contact which is not easily affected by the twisting motion of a weakened frame, resulting in an opening that will remain strong. Devices are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for panic exit hardware. The rim device is non-handed except when the following device options are used: SD (special dogging) or -2 (double cylinder). Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs – consult template).

Specifications

Spec	Value
Device functions	Device ships EO/DT/NL; Field selectable; For TP, K or L remove NL drive screw from device
Device centerline from finished floor	39 13⁄16" (1011mm) 39 11⁄16" (1008mm) with mullion
Center case	8" x 2 3⁄4" x 2 3⁄8" (203mm x 70mm x 60mm)
Mechanism case	2 1⁄4" x 2 1⁄4" (57mm x 57mm)
Projection	Pushbar neutral – 3 13⁄16" (97mm) Pushbar depressed – 3 1⁄16" (78mm)
Latch bolt	Deadlocking, 3⁄4" (19mm) throw
Finishes	605, 606, 612, 625, 626/626AM, 628, 710, 711 and 643e (619 and 630 available with 98 Series only)
Fasteners and sex bolts (SNB)	Includes screw pack for 1 3⁄4" (44mm) and 2 1⁄4" (57mm) thick metal or wood doors (Optional 425 SNB available, see page 66 for quantities)

Device lengths

Nominal printed	Door size printed
3'	2'4" to 3' (711mm to 914mm) door size
4'	2'10" to 4' (864mm to 1219mm) door size

Electrified options

Code printed	Option printed
LX-LC	Latch bolt monitor switch, low current
RX	Request to exit
RX2	Double request to exit
ESL	Emergency secure lockdown
QEL	Quiet electric latch retraction
CX	Chexit delayed exit
ALK	Alarm exit kit
WP-RX	Waterproof request to exit
CON	Allegion Connect

Mechanical options

Code printed	Option printed
-2	Double cylinder
AX	Accessible device
GBK	Glass bead kit
SNB	Sex bolts
SEC	Security screws
WH	Weep holes

Dogging feature

Statement printed
Hex key dogging standard

Dogging options

Code printed	Option printed
CD	Cylinder dogging
CD-CX	Chexit cylinder dogging
CDSI	Cylinder dogging with security indicator
HDSI	Hex dogging with security indicator
SD	Special center case dogging
LD	Less dogging
DI	Dogging indicator
CI	Cylinder dogging indicator

XP98-F/99-F Rim exit device

Statement printed
XP98/99 Rim fire exit devices are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for fire exit hardware. See page 69 for detailed information on UL fire exit hardware label and door opening size information. These are designed for single and double doors with 9954-XP mullion that require increased security. The “smart” latch changes shape when subjected to external forces. This design enables the exit door to withstand an external attack and remain secure. Additionally, the patented latch bolt design provides greater, longer-lasting latch bolt to strike contact which is not easily affected by the twisting motion of a weakened frame, resulting in an opening that will remain strong. The rim device is non-handed except when the following device option is used: -2 (double cylinder). Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs – consult template).

Statement printed

XP98/99 Rim fire exit devices are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for fire exit hardware. See page 69 for detailed information on UL fire exit hardware label and door opening size information. These are designed for single and double doors with 9954-XP mullion that require increased security. The “smart” latch changes shape when subjected to external forces. This design enables the exit door to withstand an external attack and remain secure. Additionally, the patented latch bolt design provides greater, longer-lasting latch bolt to strike contact which is not easily affected by the twisting motion of a weakened frame, resulting in an opening that will remain strong. The rim device is non-handed except when the following device option is used: -2 (double cylinder). Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs – consult template).

Specifications

Spec	Value
Device functions	Device ships EO/DT/NL; Field selectable; For TP, K or L remove NL drive screw from device
Device centerline from finished floor	39 13⁄16" (1011mm) 39 11⁄16" (1008mm) with mullion
Center case	8" x 2 3⁄4" x 2 3⁄8" (203mm x 70mm x 60mm)
Mechanism case	2 1⁄4" x 2 1⁄4" (57mm x 57mm)
Projection	Pushbar neutral – 3 13⁄16" (97 mm) Pushbar depressed – 3 1⁄16" (78 mm)
Latch bolt	Deadlocking, 3⁄4" (19mm) throw
Finishes	605, 606, 612, 625, 626/626AM, 628, 710, 711 and 643e (619 and 630 available with 98 Series only)
Fasteners and sex bolts (SNB)	Includes screw pack for 1 3⁄4" (44mm) and 2 1⁄4" (57mm) thick metal or wood doors. Optional 425 SNB available for metal doors. 425 and 825 SNB required on wood doors without SLM blocking (See page 66 for quantities)

Device lengths

Nominal printed	Door size printed
3'	2'4" to 3' (711mm to 914mm) Door size
4'	2'10" to 4' (864mm to 1219mm) Door size

Electrified options

Code printed	Option printed
LX-LC	Latch bolt monitor switch, low current
RX	Request to exit
RX2	Double request to exit
ESL	Emergency secure lockdown
QEL	Quiet electric latch retraction
CX	Chexit delayed exit
ALK	Alarm exit kit
WP-RX	Waterproof request to exit
CON	Allegion Connect

Mechanical options

Code printed	Option printed
-2	Double cylinder
AX	Accessible device
GBK	Glass bead kit
SNB	Sex bolts
SEC	Security screws
SLM	Special laminate material blocking
WH	Weep holes

Dogging option

Statement printed
No mechanical dogging; QEL options available

9847/9947 Concealed vertical rod device

Statement printed
9847/9947 Concealed vertical rod device for use on single or double metal doors, UL listed for panic exit hardware. These are certified to ANSI/BHMA A156.3 Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: -2 (double cylinder), -2SI (double cylinder with security indicator), SD (special dogging), or SS (signal switch).

Statement printed

9847/9947 Concealed vertical rod device for use on single or double metal doors, UL listed for panic exit hardware. These are certified to ANSI/BHMA A156.3 Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: -2 (double cylinder), -2SI (double cylinder with security indicator), SD (special dogging), or SS (signal switch).

Specifications

Spec	Value
Device functions	Device ships EO/DT/NL; Field selectable; For TP, K or L remove NL drive screw from device.
Device centerline from finished floor	39 5⁄8" (1006 mm) Standard Adjustable from 35 5⁄8" (905mm) to 49 5⁄8" (1260mm)
Center case	8" x 2 3⁄4" x 2 3⁄8" (203mm x 70mm x 60mm)
Mechanism case	2 1⁄4" x 2 1⁄4" (57mm x 57mm)
Projection	Pushbar neutral – 3 13⁄16" (97mm) Pushbar depressed – 3 1⁄16" (78mm)
Latch bolt	Deadlocking top and bottom bolt, 5⁄8" (16mm) throw
Door undercut	1⁄4" (7mm) recommended
Top and bottom latch case	4 1⁄2" x 2 1⁄8" x 1 1⁄2" (114mm x 54mm x 38mm)
Vertical rods	Round 2-piece adjustable rods – Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm). Bottom rod adjustable 35 5⁄8" (905mm) to 49 5⁄8" (1260mm). Extension rod kits available for doors over 8'4" (2533mm).
Finishes	605, 606, 612, 625, 626/626AM, 628, 710, 711 and 643e (619 and 630 available with 98 Series only)
Fasteners and sex bolts (SNB)	Includes screw pack for 1 3⁄4" (44mm) to 2 1⁄4" (57mm) thick metal doors (Optional 425 SNB available)

Device lengths

Nominal printed	Door size printed
2'	2' (610mm) Door size
3'	2'4" to 3' (711mm to 914mm) Door size
4'	2'10" to 4' (864mm to 1219mm) Door size

Electrified options

Code printed	Option printed
LX	Latch bolt monitor switch
RX	Request to exit
RX2	Double request to exit
ESL	Emergency secure lockdown
QEL	Quiet electric latch retraction
SS	Signal switch
CX	Chexit delayed exit
ALK	Alarm exit kit
WP-RX	Waterproof request to exit
CON	Allegion Connect

Mechanical options

Code printed	Option printed
-2	Double cylinder
-2SI	Double cylinder with security indicator
GBK	Glass bead kit
LBR	Less bottom rod
PL	Pullman latch
PN	Pneumatic latch retraction
SNB	Sex bolts
SEC	Security screws
WH	Weep holes

Dogging feature

Statement printed
Hex key dogging standard

Dogging options

Code printed	Option printed
CD	Cylinder dogging
CD-CX	Chexit cylinder dogging
CDSI	Cylinder dogging with security indicator
HDSI	Hex dogging with security indicator
SD	Special center case dogging
LD	Less dogging
DI	Dogging indicator
CI	Cylinder dogging indicator

9847-F/9947-F Concealed vertical rod fire exit device

Statement printed
9847-F/9947-F Fire exit concealed vertical rod device are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for fire exit hardware. See page 69 for detailed information on UL fire exit hardware label and door opening size information. The 9847-F device has a smooth mechanism case and the 9947-F device has a grooved case. The concealed vertical rod device is non-handed except when the following device option is used: -2 (double cylinder), -2SI (double cylinder with security indicator), SS (signal switch) devices.

Statement printed

9847-F/9947-F Fire exit concealed vertical rod device are certified to ANSI/BHMA A156.3 Grade 1 and UL listed for fire exit hardware. See page 69 for detailed information on UL fire exit hardware label and door opening size information. The 9847-F device has a smooth mechanism case and the 9947-F device has a grooved case. The concealed vertical rod device is non-handed except when the following device option is used: -2 (double cylinder), -2SI (double cylinder with security indicator), SS (signal switch) devices.

Specifications

Spec	Value
Device functions	Device ships EO/DT/NL; Field selectable; For TP, K or L remove NL drive screw from device
Device centerline from finished floor	39 5⁄8" (1006 mm) Standard Adjustable from 35 5⁄8" (905mm) to 49 5⁄8" (1260mm)
Center case	8" x 2 3⁄4" x 2 3⁄8" (203mm x 70mm x 60mm)
Mechanism case	2 1⁄4" x 2 1⁄4" (57mm x 57mm)
Projection	Pushbar neutral – 3 13⁄16" (97mm) Pushbar depressed – 3 1⁄16" (78mm)
Latch bolt	Deadlocking top and bottom bolt, 5⁄8" (16mm) throw
Door undercut	1⁄4" (7mm) recommended
Top and bottom latch case	3 3⁄4" x 1 1⁄2" x 1" (95mm x 38mm x 25mm)
Vertical rods	Round 2-piece adjustable rods – Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm). Bottom rod adjustable 35 5⁄8" (905mm) to 49 5⁄8" (1260mm) Extension rod kits available for doors over 8'4" (2533mm)
Finishes	605, 606, 612, 625, 626/626AM, 628, 710, 711 and 643e (619 and 630 available with 98 Series only)
Fasteners and sex bolts (SNB)	Includes screw pack for 1 3⁄4" (44mm) to 2 1⁄4" (57mm) thick metal doors (Optional 425 SNB available)

Device lengths

Nominal printed	Door size printed
2'	2' (610 mm) Door size
3'	2'4" to 3' (711mm to 914mm) Door size
4'	2'10" to 4' (864mm to 1219mm) Door size

Electrified options

Code printed	Option printed
LX	Latch bolt monitor switch
RX	Request to exit
RX2	Double request to exit
ESL	Emergency secure lockdown
QEL	Quiet electric latch retraction
SS	Signal switch
CX	Chexit delayed exit
ALK	Alarm exit kit
WP-RX	Waterproof request to exit
CON	Allegion Connect

Mechanical options

Code printed	Option printed
-2	Double cylinder
-2SI	Double cylinder with security indicator
GBK	Glass bead kit
LBR	Less bottom rod
PN	Pneumatic latch retraction
SNB	Sex bolts
SEC	Security screws
SLM	Special laminate material blocking
WH	Weep holes

Dogging option

Statement printed
No mechanical dogging; QEL options available

Strikes

Code printed	Strike printed
299	299 – Dull black

Strikes

Strike printed
299F – Dull black, 499F with mullions

Strikes

Code printed	Strike printed
909	909 – Dull black

Strikes

Code printed	Strike printed
909	909 – Dull black, fire rated single doors
954	954 – Dull black, fire rated double doors

Strikes

Code printed	Strike printed
338	Top – 338 – Unfinished
385A	Bottom – 385A – Unfinished

Strikes

Code printed	Strike printed
338	Top – 338 – Unfinished
385A	Bottom – 385A – Unfinished

Accessories

Code printed	Caption printed	Statement printed
299	299 Strike	Ships standard, optional strikes available.
	Hex key dogging	Comes standard on 98/99 rim exit devices.

Accessories

Code printed	Caption printed	Statement printed
299F	299F Strike	Ships standard, optional strikes available
499F	499F Strike	With 9854/9954 mullion

Accessories

Code printed	Caption printed	Statement printed
909	909 Strike	Ships standard for single or double doors.
	XP latch	Provides increased security with its two piece design.
	Hex key dogging	Comes standard on 98/99 rim exit devices.

Accessories

Code printed	Caption printed	Statement printed
909	909 Strike	Ships standard for single doors.
	XP latch	Provides increased security with its two piece design.
954	954 Strike	For fire rated double doors and 9954XP mullion.

Accessories

Code printed	Caption printed	Statement printed
338	338	Top strike
	Top latch
	Bottom latch
385A	385A	Bottom strike
	Hex key dogging	Comes standard on 9847/9947 concealed vertical rod devices

Accessories

Code printed	Caption printed	Statement printed
338	338	Top strike
	Top latch
	Bottom latch
385A	385A	Bottom strike

Von Duprin 98-99 Series Catalog · 2025-06

That's one line. Conversant prices whole schedules — hundreds of lines, minutes.

Von Duprin 98/99 rim exit device price and specs Beta

More model price guides

Frequently asked questions

How much does a Von Duprin 98 or 99 exit device cost?

What is the difference between the Von Duprin 98 and the 99?

What do I need to specify to order a 98 or 99 rim exit device?

Is the Von Duprin 98/99 handed?

What dogging comes on a Von Duprin 98/99?

What electrified options can I order on a 98 or 99?

Is the Von Duprin 98/99 UL listed, and what about fire doors?