Ives 224XY continuous hinge price and specs Beta
Ives' 224XY aluminum geared continuous hinge, the full mortise door edge protector, priced from the current Ives book. Pick a length and a finish and the part number assembles below.
Try:
Covers commercial door hardware, brand by brand ·
PricedIves 224XY 83 628
How this part number assembles
Model
Length
FinishClear Anodized
optionalpick or leave off
Order as
224XY 83 628
Brand
Ives
Series
CONTINUOUS HINGE
$424.40
$Priced from the Ives price book · effective May 29, 2026 · pp. 32–41
How this price is built
Printed grid cell — 628 finish column$424.40
List price each$424.40
Every line is a printed value from the manufacturer's book — we add, never estimate.
Specifications
This configuration
BearingModel (224XY)Patented center loaded, interlocking bearing design
Custom finishesModel (224XY)Custom anodizing and painting are available, consult factory.
Door edgeModel (224XY)Beveled or square edge doors
Door insetModel (224XY)1⁄16" door inset
Door thicknessModel (224XY)For 1-3⁄4" doors
Door weight capacityModel (224XY)For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing
Door widthModel (224XY)48" maximum door width
HandingModel (224XY)Non-handed for custom cut lengths
Size availabilityModel (224XY)83", 85", 95", 119"
Standard fastenersModel (224XY)12-24 x 3⁄4" Steel self drilling/self tapping Phillips-head screw
Series
WarrantyIves continuous hinges carry a limited lifetime warranty with exception of electrified continuous hinges, which carry a 12 month warranty from time of shipment.
From the catalog
ANSI/BHMA Certified
| Statement printed |
|---|
| All Ives aluminum geared hinges are certified to ANSI/BHMA 156.26, Grade 1. |
| XY models: Grade 1 150 lb and 300 lb door test |
| HD models: Grade 1 150 lb door test |
UL Listed
| Statement printed |
|---|
| All Ives Aluminum geared hinges are tested and approved UL 10C (90 minutes). |
Material
| Statement printed |
|---|
| 6063-T6 Aluminum. |
Hinge Duty
| Statement printed |
|---|
| All Ives Aluminum geared hinges are heavy duty (XY and HD models). |
XY Models
| Statement printed |
|---|
| Rounded gear design for extended life and smoother operation |
| Patented, center loaded, interlocking bearing design which helps handle the opening and closing of the door better over time (all sizes have 37 bearings) |
| XY mounting slot adjustability on all full and half surface models to help with installation |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
| Improved aesthetics with a curved, articulating cover design which eliminates pinch points |
HD Models
| Statement printed |
|---|
| Features transmission gear design with bearings that are evenly spaced every 3" on center - Amount of bearings varies by size |
| 83" - 32 bearings |
| 85" - 32 bearings |
| 95" - 36 bearings |
| 120" - 47 bearings |
Standard Lengths
| Statement printed |
|---|
| 83", 85", 95", 119" (XY models), 120" (HD models) custom lengths available up to 119", consult factory. Handing required for 224HD. |
Finishes
| BHMA | US | Description | Base Material |
|---|---|---|---|
| 628 | US28 | Clear aluminum anodized | Aluminum |
| Statement printed |
|---|
| Custom finishes available, consult factory. |
Field Modifications
| Statement printed |
|---|
| Ives aluminum geared continuous hinges can be cut to length from both ends during installation. |
| XY Models The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fasteners regardless of the original length of the hinge. Requires the hinge to be cut from both ends. Example: A 119" hinge can have 25" removed from each end to make it a 69" long hinge. |
| HD Models The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. |
Door Weight
| Statement printed |
|---|
| For doors up to 200 lbs, no door reinforcement is required. For doors between 200 and 450 lbs, a 16 gauge channel in the frame is required. For doors up to 600 lb, rivet nuts are required in the frame in addition to the frame reinforcement. Max door width of 4'0". For specific door weight reinforcement requirements per model, view the installation instructions and individual product pages for detail. |
Electric Power Transfer (EPT) Available on HD and XY Models
| Statement printed |
|---|
| Electric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives Continuous Hinges provide standard cut outs to fit Von Duprin EPT- 2, EPT-10 and PNT-1 devices. Consult factory for other electrical cut out options. Door handing is required. |
Electrical Through-Wire Panel With Allegion Connect (TWP CON) (XY Models Only)
| Statement printed |
|---|
| The redesigned XY Through-Wire Panel is heavy duty and easy-to-install. Hinge consists of single piece cover design for improved aesthetics and three sections with a standard bottom length and through-wire panel location. The panel can quickly slip in and out of the hinge for maintenance and replacement. Unlike all of the other manufacturer solutions, the XY through-wire panel maintains a one piece appearance on the cover side of the hinge. The new wire design features a Teflon coated wire which greatly improves performance and durability. The new panel also comes standard with the Allegion Connect 8-pin and 4-pin connectors make it easy to connect to other electrical devices. Warrantied for up to 5 years. Door handing is required. |
| Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives XY TWP hinges are fully compatible with up to 12 wire requirements. |
Electrical Cutouts
| Statement printed |
|---|
| Ives aluminum continuous hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. |
When Ordering Indicate the Following:
| Statement printed |
|---|
| 1. Door size |
| 2. Handing: LH, RH, LHR or RHR |
| 3. Manufacturer and model number of the electrical product being used. Example: Von Duprin ETPT2. |
| Statement printed |
|---|
| Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. |
Standard Cut Out Locations for EPTs and TWP Options
| Standard Length | EPT | EPT | TWP CON |
|---|---|---|---|
| 83" | 30" | 30" | 43.5" |
| 85" | 32" | 32" | 45.5" |
| 95" | 42" | 42" | 55.5" |
| 119" (XY) | – | 66" | 79.5" |
| 120" (HD) | 67" | – | – |
| Statement printed |
|---|
| XY TWP CON is located 39.5 inches from bottom of the hinge. Consult factory for TWP locations on custom length hinges. |
Standard Hardware
| Application printed | Fastener printed |
|---|---|
| Full mortise hinges | 12-24 x 3/4" steel self drilling/self tapping Phillips-head screw |
| Half surface hinges | 12-24 x 3/4" steel self drilling/self tapping Phillips-head screw |
| Includes 210XY | 12-24 x 3/4" steel self drilling/self tapping hex head screw 1/4-20 x 3/4" Phillips-head machine screws and pan head through bolts |
| Full surface hinges | 12-24 x 3/4" steel self drilling/self tapping hex head screw |
| 157XY only | 1/4-20 x 3/4" Phillips-head machine screws and pan head through bolts |
Security Screws - Hollow Metal Door and Frame (SEC/HM)
| Application printed | Fastener printed |
|---|---|
| Full mortise hinges | 12-24 x 1/2" stainless steel socket security screw |
| 112HD and 224HD only | |
| Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) |
Security Screws - 1/2 Wood, 1/2 Hollow Metal (SEC/WD/HM)
| Application printed | Fastener printed |
|---|---|
| Full mortise hinges | 12-24 X 1/2" stainless steel socket security screw |
| 112HD and 224HD only | 12 X 1-1/4" stainless steel socket security wood screw |
| Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) |
1/2 Self Drill, Self Tap / 1/2 Wood (Teks/WD)
| Application printed | Fastener printed | Second fastener printed |
|---|---|---|
| Full mortise hinges | 12-24 x 3/4" steel self drilling/self tapping Phillips-head screw | 12 x 1-1/4" Phillips-head wood screw |
| Half surface hinges | 12-24 x 3/4" steel self drilling /self tapping Phillips-head screw | 1/4 x 1-1/2" hex head lag screw |
| Full surface hinges | 12-24 x 3/4" steel self drilling/self tapping hex head screw | 1/4 x 1-1/2" hex head lag screw |
Wood Door and Frame (WD)
| Application printed | Fastener printed |
|---|---|
| Full mortise hinges | 12 x 1-1/4" Phillips-head wood screw |
| Half surface hinges | 12 x 1-1/4" Phillips-head wood screw |
| Includes 210XY | 1/4 x 1-1/2" hex head lag screw |
| Full surface hinges | 1/4 x 1-1/2" hex head lag screw |
| 157XY only |
Thread Forming (TF)
| Application printed | Fastener printed |
|---|---|
| Full mortise hinges | 12-24 x 3/4" steel thread forming Phillips-head screw |
| 112HD and 224HD only | |
| Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) |
Single Door
| Model | Hinge-Side Clearance | Lock-Side Clearance | Frame Irregularity | Beveled Door Clearance | Square Edged | Beveled Edge |
|---|---|---|---|---|---|---|
| 224XY | 5⁄16" | 1⁄8" | 1⁄32" | 1⁄32" | 15⁄32" | 1⁄2" |
Pair of Doors
| Model | Hinge-Side Clearance (2 Doors) | Lock-Side Clearance | Frame Irregularity (2 Doors) | Beveled Door Clearance (2 Doors) | Square Edge Total | Square Edge Each Door | Beveled Edge Total | Beveled Edge Each Door |
|---|---|---|---|---|---|---|---|---|
| 224XY | 5⁄8" | 3⁄16" | 1⁄16" | 1⁄16" | 7⁄8" | 7⁄16" | 5⁄16" | 15⁄32" |
| Statement printed |
|---|
| Consult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. |
How to Order
| Model | Finish | Length | Option |
|---|---|---|---|
| 112XY | 628 | 83 | TWP CON |
1 Model
| Code printed | Description printed |
|---|---|
| 224XY | Full mortise - door edge protector |
2 Finish
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| View product pages for specific finish availability per model. Consult the factory for custom finish availability. |
3 Length
| Length printed |
|---|
| 83" |
| 119" (XY) / 120" (HD) |
| Statement printed |
|---|
| Custom lengths available up to 119", consult factory. When specifying length, handing required. |
4 Option
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer prep (Only available on 026XY, 027XY, 112HD, 112XY, 114XY, 224HD, 224XY) Handing (LH and RH) required for 026, 027, 114, and 224 models |
| SECHM | Security fasteners - pin-in-socket |
| SECWDHM | Security fasteners - pin-in-socket (half wood, half hollow metal) |
| SECWDWD | Security fasteners - pin-in-socket (wood door and frame) |
| TEKSWD | Half thread forming, half wood |
| TF | Thread forming screws - pilot hole required (Only available with 112HD and 224HD) |
| TFWD | Half thread forming, half wood |
| TWP CON | Through-wire panel with Allegion Connect standard (Only available on 026XY, 027XY, 112XY, 114XY, 224XY ) |
| WD | Wood door fasteners |
| Statement printed |
|---|
| Recommended for gasketing and weatherstripping applications |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
| TWP CON | Electrical through-wire panel with Allegion Connect |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Recommended for gasketing and weatherstripping applications |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
| TWP CON | Electrical through-wire panel with Allegion Connect |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2 Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Installs easily on doors with 90° opening |
| Door edge protector |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Half surface for retrofit or new construction |
| Frame leaf depth 1-9⁄16" |
| XY (lateral and vertical) adjustability while hanging the door |
| Pinch point between cover and door is eliminated |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Standard mounting hardware
| Statement printed |
|---|
| 1⁄4-20 x 3⁄4" Phillips-head machine screws and pan head through bolts |
| 12-24 x 3⁄4" steel self drilling/self tapping hex head screw |
| 12-24 x 3⁄4" steel self drilling/self tapping Phillips-head screw |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Half surface for retrofit or new construction |
| Frame leaf depth 1-7⁄8" |
| XY (lateral and vertical) adjustability while hanging the door |
| Pinch point between cover and door is eliminated |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Standard mounting hardware
| Statement printed |
|---|
| 12-24 x 3⁄4" steel self drilling/ self tapping hex head screw |
| 12-24 x 3⁄4" steel self drilling/self tapping Phillips-head screw |
| 1⁄4-20 x 3⁄4" Phillips-head machine screws and pan head through bolts |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Half surface for retrofit or new construction |
| Frame leaf depth 1-9⁄16" |
| Recommended for gasketing and weatherstripping applications |
| XY (lateral and vertical) adjustability while hanging the door |
| Pinch point between cover and door is eliminated |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Standard mounting hardware
| Statement printed |
|---|
| 1⁄4-20 x 3⁄4" Phillips-head machine screws and pan head through bolts |
| 12-24 x 3⁄4" steel self drilling/self tapping hex head screw |
| 12-24 x 3⁄4" steel self drilling/self tapping Phillips-head screw |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Half surface for retrofit or new construction |
| Frame leaf depth 1-7⁄8" |
| Recommended for gasketing and weatherstripping applications |
| XY (lateral and vertical) adjustability while hanging the door |
| Pinch point between cover and door is eliminated |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Standard mounting hardware
| Statement printed |
|---|
| 12-24 x 3⁄4" steel self drilling/self tapping hex head screw |
| 12-24 x 3⁄4" steel self drilling/self tapping Phillips-head screw |
| 1⁄4-20 x 3⁄4" Phillips-head machine screws and pan head through bolts |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| TF | Thread forming screws |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
| TWP CON | Electrical through-wire panel with Allegion Connect |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Door edge protector |
| Recommended for gasketing and weatherstripping applications |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
| TWP CON | Electrical through-wire panel with Allegion Connect |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| A patented easy-to-install, heavy duty, full surface continuous hinge |
| Narrow frame |
| XY (lateral and vertical) adjustability while hanging the door |
| Articulating cover design eliminates pinch point between center channel cover and door and frame leaf covers |
Standard mounting hardware
| Statement printed |
|---|
| 12-24 x 3⁄4" steel self drilling/self tapping hex head screw |
| 1⁄4-20 x 3⁄4" Phillips-head machine screws and pan head through bolts |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| XY (lateral and vertical) adjustability while hanging the door |
| Articulating cover design eliminates pinch point between center channel cover and door and frame leaf covers |
Standard mounting hardware
| Statement printed |
|---|
| 12-24 x 3⁄4" steel self drilling/self tapping hex head screw |
| 12-24 x 3⁄4" steel self drilling/self tapping Phillips-head screw |
| 1⁄4-20 x 3⁄4" Phillips-head machine screws and pan head through bolts |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Door edge protector |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| TF | Thread forming screws |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Door edge protector |
| Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps |
Certifications
| Statement printed |
|---|
| Exceeds Grade 1 ANSI/BHMA 156.26 for 150 lbs and 300 lbs |
| UL10C listed (90 min) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
| TWP CON | Electrical through-wire panel with Allegion Connect |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| TEKSWD | 1⁄2" Self drill, self tap 1⁄2" wood |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum | US28 |
Standard mounting hardware
| Statement printed |
|---|
| #10 x 1/2" self drilling, self tapping screws |
| #10 x 1" wood screws |
Certifications
| Statement printed |
|---|
| Meets ANSI/BHMA 156.26 |
| UL10C listed (3 hour) |
Options
| Code printed | Option printed |
|---|---|
| CON | Allegion Connect |
| EPT | Electric power transfer |
| HT | Hospital tip |
| TW8 | Electrical through-wire |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| WD | Wood door and frame |
| Statement printed |
|---|
| Patented cover protects hinge knuckle and creates a cleaner and neater appearance |
| XY adjustability feature allows for better door alignment during installation |
Certifications
| Statement printed |
|---|
| Meets ANSI/BHMA 156.26 |
| UL10C listed (3 hour) |
Options
| Code printed | Option printed |
|---|---|
| CON | Allegion Connect |
| EPT | Electric power transfer |
| TW8 | Electrical through-wire |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum/steel | US28 |
Standard mounting hardware
| Statement printed |
|---|
| #10 X 1⁄2" self drilling, self tapping screws |
| #10 X 1" wood screws |
| Cover clips |
Certifications
| Statement printed |
|---|
| Meets ANSI/BHMA 156.26 |
| UL10C listed (3 hour) |
Options
| Code printed | Option printed |
|---|---|
| HT | Hospital tip |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| WD | Wood door and frame |
| Statement printed |
|---|
| Full wrap edge guard |
| Adjustable for undersized and out of square doors |
Standard mounting hardware
| Statement printed |
|---|
| #10-32 x 3⁄4" stainless screw and Adjusta-Stud* fastener |
| #10 X 1/2" self drilling, self tapping screws |
| #10 X 1" wood screws |
Certifications
| Statement printed |
|---|
| Meets ANSI/BHMA 156.26 |
| UL10C listed (3 hour) |
Options
| Code printed | Option printed |
|---|---|
| CON | Allegion Connect |
| EPT | Electric power transfer |
| HT | Hospital tip |
| TW8 | Electrical through-wire |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| WD | Wood door and frame |
| Statement printed |
|---|
| Edge guard |
| May be difficult to install on inside walls |
Standard mounting hardware
| Statement printed |
|---|
| #10 x 1/2" self drilling, self tapping screws |
| #10 x 1" wood screws |
Certifications
| Statement printed |
|---|
| Meets ANSI/BHMA 156.26 |
| UL10C listed (3 hour) |
Options
| Code printed | Option printed |
|---|---|
| HT | Hospital tip |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| WD | Wood door and frame |
| Statement printed |
|---|
| Half wrap edge guard |
Standard mounting hardware
| Statement printed |
|---|
| #10 X 1⁄2" self drilling, self tapping screws |
| #10 X 1" wood screws |
Certifications
| Statement printed |
|---|
| Meets ANSI/BHMA 156.26 |
| UL10C listed (3 hour) |
Options
| Code printed | Option printed |
|---|---|
| CON | Allegion Connect |
| EPT | Electric power transfer |
| HT | Hospital tip |
| TW8 | Electrical through-wire |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| SECWDHM | Security screws - 1⁄2" wood, 1⁄2" hollow metal |
| SECWDWD | Security screws - wood door and frame |
| WD | Wood door and frame |
| Statement printed |
|---|
| Patented cover protects hinge knuckle and creates a cleaner and neater appearance |
| XY adjustability feature allows for better door alignment during installation |
| Half wrap edge guard |
Certifications
| Statement printed |
|---|
| Meets ANSI/BHMA 156.26 |
| UL10C listed (3 hour) |
Options
| Code printed | Option printed |
|---|---|
| EPT | Electric power transfer |
Optional Mounting Hardware
| Code printed | Option printed |
|---|---|
| SECHM | Security screws - hollow metal door and frame |
| WD | Wood door and frame |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 628 | Clear aluminum anodized | Aluminum/steel | US28 |
Certifications
| Statement printed |
|---|
| 700 Series is certified to ANSI/BHMA 156.26, Grade 1 |
| CS Series models certified ANSI/BHMA 156.26, Grade 1, 150 lb door test |
UL Listed
| Statement printed |
|---|
| All Ives pin and barrel hinges are certified UL10C listed (3 hr) |
Material
| Statement printed |
|---|
| 700, 702, 705, 711, 715 Series, 304 Series, 14 Gauge stainless steel |
| CS Series 304 Series, 14 Gauge stainless steel body and 6063-T6 aluminum cover |
Standard Series
| Statement printed |
|---|
| The standard series pin and barrel continuous hinges features twin self lubricated nylon bearings with a stainless steel pin. |
CS Series
| Statement printed |
|---|
| The CS Series is a heavy duty, easy-to-install, stainless steel pin and barrel continuous hinge that can be used for fire applications and is highly suitable for after-market or new construction situations. The patented covers hide the unsightly pin and barrel of the standard pin and barrel hinges, giving the CS Series continuous hinge a stylish appearance to accompany heavy duty performance. |
| The CS Series includes medical grade, patented nylon winged bearings. |
| They also include the XY adjustability feature which allows for better door alignment during installation. |
Standard Lengths
| Statement printed |
|---|
| 83", 85", 95", 120" |
| Custom lengths available up to 120", consult factory |
| Handing required for 702, 705, 711, 715 |
Field Modifications
| Statement printed |
|---|
| Ives pin and barrel continuous hinges can be cut to length during installation. |
Standard Models
| Statement printed |
|---|
| The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. |
CS Models
| Statement printed |
|---|
| The CS Series of stainless steel hinges can be cut to size in the field. For aftermarket installations, horizontal slots in the leaves allow for lateral adjustment after the door has been secured to the frame. |
Door Weight
| Statement printed |
|---|
| For doors up to 200 lbs, no door reinforcement is required. For doors between 200 and 300 lbs, a 16 gauge channel in the frame is required. For doors up to 600 lbs (max door width of 4'0"), rivet nuts are required in the frame in addition to the frame reinforcement. For door weight reinfocement requirements by model, view the installation instructions and following product pages for detail. |
Hospital Tips (HT) for Standard Models
| Statement printed |
|---|
| The standard hospital tip option includes an angle machined channel cover and bearing to provide a flush angled surface. |
| Must be ordered in exact lengths. Available on 700 Series hinges. |
Finishes
| BHMA | Description | Substrate | Finish |
|---|---|---|---|
| 700, 702, 705, 711, 715 Series | |||
| 700CS, 705CS, 711CS Series | |||
| 628 | Clear aluminum anodized | Aluminum | US28 |
| Statement printed |
|---|
| Custom finishes available, consult factory. |
Electric Power Transfer (EPT) Available on 700, 705, 715, 700CS, 715CS Models
| Statement printed |
|---|
| Electric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives pin and barrel hinges provide standard cut outs to fit Von Duprin EPT- 2, EPT-10 and PNT-1 devices. Consult factory for other electrical cut out options. Door handing is required. |
Electrical Through-Wire (TW8) for Standard Models (700, 705, 715) Only
| Statement printed |
|---|
| Recommended for low frequency usage. Provides electric power transfer from the frame to the door cable in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. A monitor (MON) switch is available as an engineered special. Consult factory for availability. |
Electrical Through-Wire Panel With Allegion Connect (TWP) (700CS Models Only)
| Statement printed |
|---|
| The through-wire panel solution works in the CS mortise hinge to maintain the clean aesthetic design of aluminum geared continuous hinges. Made with the same medical grade bearings of Ives other pin and barrel hinges, the CS Series brings through-wire panel innovation to your continuous hinge application while keeping its great looks. |
| The CS Series through-wire panel is a heavy duty, easy- to-install, stainless steel panel. Tested to 2.5 million cycles, the CS Series panel can quickly slip in and out of the hinge for maintenance and replacement. |
| Unlike all of the other manufacturer solutions the CS Series through-wire panel maintains a one piece appearance on the cover side of the hinge. It installs with the same 5⁄16" clearance as aluminum geared hinges and works in all of the decorative cover finishes. |
| Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire panel is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. |
Electrical Cutouts
| Statement printed |
|---|
| Ives pin and barrel continuous hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. |
| Statement printed |
|---|
| *Only available for full mortise hinges. |
When Ordering Indicate the Following:
| Statement printed |
|---|
| Door size |
| Handing: LH, RH, LHR or RHR |
| Manufacturer and model number of the electrical product being used. Example: Von Duprin ETPT2 |
| Statement printed |
|---|
| Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. |
| For your general information following are standard locations for Von Duprin EPT2 or EPT10, and TW (through-wire). |
| In accordance with industry standards, all cutouts are made from top edge of door to center line of cut-out. |
| Standard Length | EPT | TW | TWP |
|---|---|---|---|
| 83" | 30" | 43-19⁄32" | 43-13⁄16" |
| 85" | 32" | 45-17⁄32" | 44-29⁄32" |
| 95" | 42" | 55-17⁄32" | 55-9⁄32" |
| 120" | 67" | 80-17⁄32" | 79-1⁄2" |
Standard Hardware
| Application printed | Fastener printed |
|---|---|
| 700/702/705/711/715 | 10 x 1/2" stainless self drilling/self tapping Phillips-head screw 10 x 1" stainless Phillips-head wood screw (1/2 pkg for door or frame) |
| 700CS/715CS | 12-24 x 3/4" stainless self drilling/self tapping Phillips-head screw |
Security Screws - Hollow Metal Door And Frame (SECHM)
| Application printed | Fastener printed |
|---|---|
| 700/702/705/711/715 | 10 X 1/2" stainless steel Torx security screw |
| 700CS/715CS | 12-24 x 1/2" stainless security head machine screw |
Security Screws - 1/2 Wood, 1/2 Hollow Metal (SECWDHM)
| Application printed | Fastener printed |
|---|---|
| 700/702/705/711/715 | 10 X 1/2" stainless steel Torx security screw 10 x 1" stainless Torx security wood screw |
Security Screws - 1/2 Wood, 1/2 Hollow Metal (SECWDWD)
| Application printed | Fastener printed |
|---|---|
| 700/702/705/711/715 | 10 x 1" stainless Torx security wood screw |
Wood Door and Frame (WD)
| Application printed | Fastener printed |
|---|---|
| 700/702/705/711/715 | 10 x 1" stainless Phillips-head wood screw |
| 700CS/715CS | #12 x 1-1/4" stainless sheet metal screw |
Single Door
| Model | Hinge-Side Clearance | Lock-Side Clearance | Frame Irregularity | Beveled Door Clearance | Square Edged | Beveled Edged |
|---|---|---|---|---|---|---|
| 705* | 1⁄2" | 1⁄8" | 1⁄32" | 1⁄32" | 21⁄32" | 11⁄16" |
Pair of Doors
| Model | Hinge-Side Clearance | Lock-Side Clearance | Frame Irregularity | Beveled Door Clearance | Square Edge Total | Square Edge Each Door | Beveled Edge Total | Beveled Edge Each Door |
|---|---|---|---|---|---|---|---|---|
| 705* | 1⁄2" | 3⁄16" | 1⁄16" | 1⁄16" | 1 1⁄4" | 5⁄8" | 1 5⁄16" | 21⁄32" |
| Statement printed |
|---|
| Consult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. |
| Statement printed |
|---|
| * Use the Adjusta-Studs with 705. |
How to Order
| Model | Option 1 | Finish | Length | Option 2 |
|---|---|---|---|---|
| 700 | HT | US32D | 83 | TW8CON |
1 Model
| Code printed | Description printed |
|---|---|
| 700/700CS Stainless steel full mortise | |
| 715/715CS | Stainless steel full mortise - half wrap |
2 Option 1
| Code printed | Option printed |
|---|---|
| HT | Hospital tip (700 model only) |
3 Finish
| BHMA | Description | Substrate | Finish | Availability |
|---|---|---|---|---|
| 628 | Clear aluminum anodized | Stainless steel/ aluminum | US28 | CS Series only |
| Statement printed |
|---|
| Custom finishes available, consult factory. |
4 Length
| Length printed |
|---|
| 83" |
| Statement printed |
|---|
| Custom lengths available up to 120", consult factory. When specifying length, handing required. |
5 Option 2
| Code printed | Option printed |
|---|---|
| CON | Allegion Connect (700, 705, 715, 700CS models only) |
| EPT | Electric power transfer prep (700, 705, 715, 700CS, 715CS models only) Handing (LH and RH) required for 026, 027, 114, and 224 models |
| SECHM | Security fasteners - Torx |
| SECWDHM | Security fasteners - Torx (half wood, half hollow metal) |
| SECWDWD | Security fasteners - Torx (wood door and frame) |
| TW8 | Electric through-wire (700, 705, 715 models only) |
| TWP | Through-wire panel (only available on 700CS) |
| WD | Wood door fasteners |
Ives Architectural Hardware Products Catalog · 2026-04
That's one line. Conversant prices whole schedules — hundreds of lines, minutes.