Schlage L9050 mortise lock price and specs Beta
The L9050 office lock anchors Schlage's L9000 mortise series, priced from the current Schlage book. Pick the lever style, rose and finish and the part number assembles below, decoded segment by segment.
Try:
Covers commercial door hardware, brand by brand ·
Needs inputSchlage L9050
How this part number assembles
FunctionEntrance/office
CylinderConventional 6-pinassumed
requiredpick to price
requiredpick to price
requiredpick to price
HandingRight Handassumed
optionalpick or leave off
Brand
Schlage
Series
L9000
$1,495.00 – $1,525.00
narrows when the lever style is picked
$Priced from the Schlage price book · effective May 29, 2026 · pp. 159–174
Specifications
Series
AccessibilityAll Schlage L levers comply with the Americans with Disabilities Act (ADA), which requires that “Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate operable parts shall be 5 pounds (22.2 N) maximum.”
Armor frontL9000 Series Standard: 1-1⁄4" x 8" x 7⁄32" (32 mm x 203 mm x 6 mm) Optional: 1-1⁄16" x 8" x 7⁄32" (27 mm x 203 mm x 6 mm)
Backset2-3⁄4" (70 mm) only
Certifications and approvalsL/LV9000: ANSI/BHMA A156.13-2017 Series 1000, Grade 1 Operational and Security With FSIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 2 Security With SFIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 3 Security
Cylinder formats6-pin Conventional mortise cylinder (standard); also available in concealed mortise cylinder, FSIC, SFIC and 7-pin SL cylinder formats plus less cylinder options; two nickel silver cut keys per lock; compatible with competitor cylinders and cams that support the L9000 Series
Deadbolt1" (25 mm) throw stainless steel deadbolt
Door thicknessStandard: 1-3⁄4" (44 mm) Optional: 1-3⁄8" (35 mm) Over 1-3⁄4" specify door thickness and position in door EE, EI, EO, ED
Finishes14 available: 605, 606, 609, 612, 613, 619, 622, 625, 626, 626AM, 629, 630, 630AM, 643e
HandingL9000 Series: Field-reversible
KeywaysPatented Everest 29 S123 (standard); also available in open, restricted, and Primus security levels with available master keying and construction keying
Latchbolt3⁄4" (19 mm) throw stainless steel latch with anti-friction tongue
Levers and knobs33 lever designs (see pages 10-13): Forged brass and cast stainless steel Two knob designs (see page 13): Heavy-duty wrought brass or stainless steel (not available for LM9200) Tactile warning applied to outside lever; available on 01, 02, 03, 05, 06, 07, 12, 17, 18, M51, M52, M81, ME1, ME2, ME3 lever designs
Case sizeL9000 Series: 4-7⁄16" x 6-1⁄16" x 1" (113 mm x 154 mm x 25 mm)
Case materialCold Rolled Steel (CRS) with zinc dichromate plating
Power input12V or 24V DC (24V DC only on motorized latch retraction functions)
Roses and escutcheonsL escutcheons: 7-15⁄16” x 1-3⁄4” x 7⁄16” (202 mm x 44 mm x 11 mm); cold-forged brass and stainless steel N escutcheons: 7-7⁄8” x 2-1⁄2” x 7⁄16” (200 mm x 64 mm x 11 mm); heavy-wrought, reinforced brass and stainless steel Roses: A, B, C: wrought brass and stainless steel; AVA and MER: forged brass
StrikeL9000 Series Standard: ANSI curved lip strike 1-1⁄4" x 4-7⁄8" (32 mm x 124 mm) x 1-3⁄16" (30 mm) lip length with dust box Optional: Extended lip strike options (7⁄8", 1", 1-1⁄2", 1-3⁄4", 2")
SpacingKnob or lever to cylinder: 3-7⁄8" (98 mm); knob or lever to thumbturn hub: 2-11⁄16" (68 mm)
Warranty10-year limited mechanical and 3-year limited electromechanical
From the catalog
Chassis
| Spec | L Mechanical & L Wired Electrified | LM9300 |
|---|---|---|
| Case material | Cold Rolled Steel (CRS) with zinc dichromate plating | Cold Rolled Steel (CRS) with zinc dichromate plating |
| Case size | L9000 Series: 4-7⁄16" x 6-1⁄16" x 1" (113 mm x 154 mm x 25 mm) L400 Series: 4-7⁄16" x 3-5⁄8" x 1" (113 mm x 92 mm x 25 mm) | 4-7⁄16" x 6-1⁄16" x 1" (113 mm x 154 mm x 25 mm) |
| Spacing | Knob or lever to cylinder: 3-7⁄8" (98 mm); knob or lever to thumbturn hub: 2-11⁄16" (68 mm) | Knob or lever to cylinder: 3-7⁄8" (98 mm); knob or lever to thumbturn hub: 2-11⁄16" (68 mm) |
| Door thickness | Standard: 1-3⁄4" (44 mm) Optional: 1-3⁄8" (35 mm) Over 1-3⁄4" specify door thickness and position in door EE, EI, EO, ED | Standard: 1-3⁄4" (44 mm) |
| Backset | 2-3⁄4" (70 mm) only | 2-3⁄4" (70 mm) only |
| Handing | L9000 Series: Field-reversible L400 Series: Non-handed | Handed to order, not field reversible |
Trim
| Spec | L Mechanical & L Wired Electrified | LM9300 |
|---|---|---|
| Levers/knobs | 33 lever designs (see pages 10-13): Forged brass and cast stainless steel Two knob designs (see page 13): Heavy-duty wrought brass or stainless steel (not available for LM9200) Tactile warning applied to outside lever; available on 01, 02, 03, 05, 06, 07, 12, 17, 18, M51, M52, M81, ME1, ME2, ME3 lever designs | 33 lever designs (see pages 10-13): Forged brass and cast stainless steel Two knob designs (see page 13): Heavy-duty wrought brass or stainless steel (not available for LM9200) Tactile warning applied to outside lever; available on 01, 02, 03, 05, 06, 07, 12, 17, 18, M51, M52, M81, ME1, ME2, ME3 lever designs |
| Health care trims | Ligature resistant lever (SL1) and knob (SK1) High Security Ligature Resistant (HSLR) trim HL6 hospital latch | — |
| Roses/escutcheons | L escutcheons: 7-15⁄16” x 1-3⁄4” x 7⁄16” (202 mm x 44 mm x 11 mm); cold-forged brass and stainless steel N escutcheons: 7-7⁄8” x 2-1⁄2” x 7⁄16” (200 mm x 64 mm x 11 mm); heavy-wrought, reinforced brass and stainless steel Roses: A, B, C: wrought brass and stainless steel; AVA and MER: forged brass | L escutcheons: 7-15⁄16” x 1-3⁄4” x 7⁄16” (202 mm x 44 mm x 11 mm); cold-forged brass and stainless steel N escutcheons: 7-7⁄8” x 2-1⁄2” x 7⁄16” (200 mm x 64 mm x 11 mm); heavy-wrought, reinforced brass and stainless steel Roses: A, B, C: wrought brass and stainless steel; AVA and MER: forged brass |
| Finishes | 14 available: 605, 606, 609, 612, 613, 619, 622, 625, 626, 626AM, 629, 630, 630AM, 643e | 14 available: 605, 606, 609, 612, 613, 619, 622, 625, 626, 626AM, 629, 630, 630AM, 643e |
| Combinations | Combinations of available levers and/or knobs allowed. Roses cannot be combined with escutcheons. | Combinations of available levers and/or knobs allowed. Roses cannot be combined with escutcheons. |
Latches, Armors & Strikes
| Spec | L Mechanical & L Wired Electrified | LM9300 |
|---|---|---|
| Armor | L9000 Series Standard: 1-1⁄4" x 8" x 7⁄32" (32 mm x 203 mm x 6 mm) Optional: 1-1⁄16" x 8" x 7⁄32" (27 mm x 203 mm x 6 mm) L400 Series 1-1⁄4” x 5-9⁄16” x 7⁄32" (32 mm x 141 mm x 6 mm) | Standard: 1-1⁄4" x 8" x 7⁄32" (32 mm x 203 mm x 6 mm) Optional: 1-1⁄16" x 8" x 7⁄32" (27 mm x 203 mm x 6 mm) |
| Latch | 3⁄4" (19 mm) throw stainless steel latch with anti-friction tongue | 3⁄4" (19 mm) throw stainless steel latches, top and bottom latches via concealed vertical rod |
| Deadbolt | 1" (25 mm) throw stainless steel deadbolt | — |
| Strike | L9000 Series Standard: ANSI curved lip strike 1-1⁄4" x 4-7⁄8" (32 mm x 124 mm) x 1-3⁄16" (30 mm) lip length with dust box Optional: Extended lip strike options (7⁄8", 1", 1-1⁄2", 1-3⁄4", 2") L400 Series Standard: 1-1⁄8" x 3-1⁄2" (29 mm x 89 mm) with dust box Optional: 1-1⁄4" x 4-7⁄8" (32 mm x 124 mm) with dust box | Standard: ANSI curved lip strike 1-1⁄4" x 4-7⁄8" (32 mm x 124 mm) x 1-3⁄16" (30 mm) lip length with dust box Optional: Extended lip strike options (7⁄8", 1", 1-1⁄2", 1-3⁄4", 2") |
Cylinders & Key Systems
| Spec | L Mechanical & L Wired Electrified | LM9300 |
|---|---|---|
| Formats | 6-pin Conventional mortise cylinder (standard); also available in concealed mortise cylinder, FSIC, SFIC and 7-pin SL cylinder formats plus less cylinder options; two nickel silver cut keys per lock; compatible with competitor cylinders and cams that support the L9000 Series | 6-pin Conventional mortise cylinder (standard); also available in concealed mortise cylinder, FSIC, SFIC and 7-pin SL cylinder formats plus less cylinder options; two nickel silver cut keys per lock; compatible with competitor cylinders and cams that support the L9000 Series |
| Keyways | Patented Everest 29 S123 (standard); also available in open, restricted, and Primus security levels with available master keying and construction keying | Patented Everest 29 S123 (standard); also available in open, restricted, and Primus security levels with available master keying and construction keying |
Wired Electrified
| Spec | L Mechanical & L Wired Electrified | LM9300 |
|---|---|---|
| Input voltage | 12V or 24V DC (24V DC only on motorized latch retraction functions) | — |
| Operating mode | Fail Safe or Fail Secure via switch on chassis (except L9510, L9580, and L9582) | — |
| Peak current | 12V operating voltage: 1 amp (not applicable to latch retraction functions) 24V operating voltage: 0.4 amp lever control; 1.4 amp latch retraction Holding current: 0.1 amp lever control; 0.1 amp latch retraction | 12V operating voltage: 1 amp (not applicable to latch retraction functions) 24V operating voltage: 0.4 amp lever control; 1.4 amp latch retraction Holding current: 0.1 amp lever control; 0.1 amp latch retraction |
| Request to exit | Modular option on L909X, L949X, L9510, L9580, L9692, and L9695 electrified functions (when ordering or added in field) Available for mechanical functions: L9010/25/26/50/56/70/71/80 and L9453/56/58/65/66/80/85/96 Rating: 3A @ 125V AC/2A @ 30V DC | — |
| Latch bolt monitor | Available on all electrified functions and L9010/25/26/50/56/70/71/80/82 and L9453/56/65/66/80/85/96 mechanical functions | — |
| Door position sensor | Internal available on L909x electrified and L9010/25/26/80/82 mechanical functions; external available on all functions | — |
| Deadbolt monitor | Standard on L949x electrified and available on L9453/56/57/58/80/85/96 mechanical functions | — |
Warranty
| L Mechanical & L Wired Electrified | LM9300 |
|---|---|
| 10-year limited mechanical and 3-year limited electromechanical | 3-year limited mechanical |
Certifications
| Spec | L Mechanical & L Wired Electrified | LM9300 |
|---|---|---|
| ANSI/BHMA | L/LV9000: ANSI/BHMA A156.13-2017 Series 1000, Grade 1 Operational and Security With FSIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 2 Security With SFIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 3 Security L400: ANSI/BHMA A156.36-2010, Grade 1 | ANSI/BHMA A156.37-2014 Grade 1 Operational and Security With FSIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 2 Security With SFIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 3 Security |
| ICC | Complies with ICC A117.1 Accessible and Usable Buildings and Facilities | Certified by Intertek and labeled showing compliance to ICC 500-2020, FEMA P-320 (2021), and FEMA P-361 (2021) as required by the International Building Code and Florida Building Code Enhanced Protection Area (EHPA) standard when paired with appropriate Steelcraft doors (all except LM9310 and LM9370 functions) |
| UL/cUL | L/LV9000 Series: UL 10C and CAN/ULC-S104 3-hour fire door (except L9076 and L9077) Electrified functions are UL/ULC listed 3-hour for single-point locking applications UL 437 Listed when using UL 437 Primus cylinder L400 Series: L400 UL Listed Auxiliary Lock for 3-hour fire door UL 437 Listed when using UL 437 Primus cylinder | UL 10C and CAN/ULC-S104 3-hour fire door UL 437 Listed when using UL 437 Primus cylinder |
| UL 294 | UL 294 Access Control Performance Levels: Destructive Attack - level I; Line Security - level I; Standby Power - level I; Endurance - level IV (with DM or LX, Endurance - level I) ULC-S319 Class III (L909X and L949X functions only) | — |
| CA Fire Code | All levers with a return to door of 1⁄2" (13 mm) or less comply (Formerly Title 19, California State Fire Marshal Standard) | All levers with a return to door of 1⁄2" (13 mm) or less comply (Formerly Title 19, California State Fire Marshal Standard) |
| Building codes | Miami-Dade NOA and Florida Building Commission Listings Texas Department of Insurance (TDI) for impact and non-impact applications | Florida Building Commission Listing for impact rated assemblies |
| Federal | BAA compliant, all functions | BAA compliant, all functions |
Non-Keyed Functions
| Schlage | Code printed | ANSI | Name printed |
|---|---|---|---|
| L/LV9040 with XL11-446 | L/LV9040 | - | Privacy with thumbturn both sides |
Single Cylinder Non-Deadbolt Functions
| Schlage | ANSI | Name printed |
|---|---|---|
| L/LV9050 | F04 | Entrance/office lock |
Single Cylinder Deadbolt Functions
| Schlage | Code printed | ANSI | Name printed |
|---|---|---|---|
| L9460 with XL11-635 | L9460 | - | Cylinder x thumbturn deadbolt with fixed levers |
| L9460 with XL11-886 | L9460 | - | Cylinder x thumbturn deadbolt with inside active lever |
| L9464 with XL11-886 | L9464 | - | Single cylinder deadbolt with inside active lever |
| L9485 with XL11-557 | L9485 | - | Prison function lock |
Double Cylinder Deadbolt Functions
| Schlage | Code printed | ANSI | Name printed |
|---|---|---|---|
| L9462 with XL11-886 | L9462 | - | Double cylinder deadbolt with active inside lever |
Cylinder type
| Code printed | Format printed |
|---|---|
| P6 | 6-pin cylinder (default) |
| T | FSIC – Construction Core |
| F | FSIC, 6-pin less Schlage logo |
| T | Refundable Construction FSIC |
Available electrified options include:
| Code printed | Name printed |
|---|---|
| RX | Request to Exit |
| LX | Latch bolt monitor |
| DPS | Door Position Switch |
| DM | Deadbolt monitor (DM) |
Schlage L Series Catalog · 2025-11
That's one line. Conversant prices whole schedules — hundreds of lines, minutes.